Rebar Calculator for Slabs

Rebar Calculator for Slabs

Grid of rebar for a slab, pad or garage floor. Free to use, with a short guide below.

What this calculator does

Enter the slab size and the bar spacing to get how many bars run each way, the total length and the number of 20 ft sticks to order.

How to use it

  1. 1

    Measure the slab length and width in feet.

  2. 2

    Enter the bar spacing from your plan. 16 in is common for a garage slab.

  3. 3

    Note the bar count each way and the number of 20 ft sticks.

  4. 4

    Check the size and spacing with your plan or inspector, then order or ask Fazal & Son for a free quote.

Why it matters

Rebar holds a slab together when the ground moves or the load is heavy. Too little and the slab can crack apart. Too much wastes money and makes pouring slower. Getting the count right before the pour avoids a rushed trip to the supplier.

Tips from the job site

  • Lift the bars on chairs so they sit in the middle of the slab, not on the ground.
  • Lap bars at least 40 times the bar diameter and tie them.
  • Keep bars 2 in from the edges and 3 in from the soil.

These results are estimates. We measure on site before we quote, and we confirm local rules with your city.

Materials and tools you may need

Rebar sticksSize depends on the plan, often 10M or 15M.
Rebar chairsHold the bars at the right height in the slab.
Tie wire and tie toolTie bars where they cross.
Bolt cutters or rebar cutterFor clean cuts to length.
Gloves and eye protectionCut ends are sharp.
Wire mesh (optional)Used on light slabs instead of bars.

Not sure how much to order, or want a professional to do the work? Get a free quote from Fazal & Son.

Related calculators

Need this done for you?

We work in Kitchener and surrounding areas (50 km). Send us your project details and get a clear quote.