Roof Pitch and Rafter Length Calculator

Roof Pitch and Rafter Length Calculator

Rafter length, angle and slope from the run and pitch. Free to use, with a short guide below.

What this calculator does

Enter the run, the pitch and the overhang to get the rafter length, the roof angle and the rise.

How to use it

  1. 1

    Measure the run, which is half the span of the building, in feet.

  2. 2

    Enter the pitch, the rise per 12 in of run (6 means 6 in of rise).

  3. 3

    Enter the overhang in inches.

  4. 4

    Read the rafter length and angle, then confirm with a framer or order with Fazal & Son after a free quote.

Why it matters

The pitch changes the rafter length, the snow load, the shingle choice and the look of the roof. A steeper roof sheds snow better but costs more to frame and cover.

Tips from the job site

  • Add the thickness of the ridge board when you cut the rafters.
  • Mark all rafters from one pattern rafter for a straight roof.
  • Check the snow load and spans in the building code.

These results are estimates. We measure on site before we quote, and we confirm local rules with your city.

Materials and tools you may need

Rafter lumber2 x 6 to 2 x 10, by the span and the load.
Ridge boardJoins the top of the rafters.
Framing squareMark the plumb and seat cuts.
Rafter hangers or nailsFasten at the ridge and the wall.
Collar ties or rafter tiesHold the roof from spreading.
SheathingPlywood or OSB over the rafters.

Not sure how much to order, or want a professional to do the work? Get a free quote from Fazal & Son.

Related calculators

Need this done for you?

We work in Kitchener and surrounding areas (50 km). Send us your project details and get a clear quote.